Wedding Rings Adelaide

Wedding rings, designed in Adelaide to sit with your engagement ring

A wedding ring is worn more than any other piece of jewellery you will own: every day, through everything, usually for the rest of your life. It deserves to be made properly and to sit properly against the ring beside it. The twenty-six wedding bands in this collection are designed in our King William Street boutique, Australian made, and set and hand-finished at our Adelaide bench. Priced live by metal, width and finger size, plain bands start from about $450 in 9ct yellow gold and diamond bands from about $1,550 in 9ct gold, and every band leaves with a Simon Alexander certificate.

We are an independent manufacturing jeweller, so nothing here is fixed. A profile can be made wider, a diamond band can be shaped to curve around your engagement ring, and a men's band can be made heavier and broader than anything on this page. If you can describe it, we can draw it and make it.

Plain wedding bands

A plain band is the hardest thing to get right, because there is nothing to hide behind. The profile — the shape of the band in cross-section — decides how it feels on the finger and how it reads beside an engagement ring. We make five, each listed in 9ct or 18ct gold or platinum and in widths from 2mm to 6mm (the knife-edge to 5mm), priced by metal, width and finger size; a 2mm round band in 18ct yellow gold is from about $1,400.

• Round — fully rounded, the softest profile against the finger and against a neighbouring ring. The classic choice, and the one most people settle on once they have tried the others.
• Half-round — flat on the inside, gently domed on the outside. Sits closer to the finger than a full round and slips easily beside a low-set engagement ring.
• Knife-edge — two planes meeting at a fine ridge down the centre. Catches the light along one line and looks sharper and slimmer than its width suggests.
• Tapered — narrower at the back of the hand than at the front, so the band is comfortable between the fingers and reads finer from above.
• Flat — a clean rectangular section with softened edges. Modern, quiet, and the natural partner to a flat-sided or bezel-set engagement ring.

A brushed or matte finish, a width beyond those listed, or another alloy is made to order. Tell us what you are after and we will quote it.

Diamond wedding bands

A diamond band is defined by how the stones are held. The setting changes the look, the feel against the finger and how much of the diamond you see, so it is worth trying more than one on before you decide. Every setting below is listed in 9ct or 18ct gold or platinum, set with natural diamonds by our jewellers at our Adelaide bench, and priced by metal and finger size; bezel and petite shared claw start from about $1,600 in 9ct gold. Each band's price is shown live on its page.

• Shared claw — each claw holds two neighbouring diamonds, so there is very little metal between stones and the band reads as an unbroken line of light. Made as a petite shared claw, or a full shared claw with twenty diamonds.
• Bezel — each diamond sits in its own fine rim of metal. The most protective setting, smooth to the touch, and the one to choose if the band will take a lot of wear.
• Channel — a row of diamonds set between two continuous walls of metal, flush with the band. Nothing to catch; a clean, tailored line.
• Bead set — tiny raised beads of metal hold each stone. A fine, vintage-leaning look with a lot of sparkle for the carat weight.
• Claw and U-claw — individual claws raise each diamond so light enters from the side as well as the top. Made as a petite U-claw, a claw set with eighteen diamonds, or a U-claw with twenty diamonds.
• Grain set — diamonds set closely in a fine grain of metal along the top of the band; twenty-two stones.
• Pavé — the surface of the band paved with small diamonds held by minute beads, so that from a step away it reads as pure light.

Beyond the settings, the collection carries our named diamond bands — Ivy, Anika, Annie, Ester, Rose, Penny, Venus, Kat, Brie and Celia, with Ivy and Anika from about $1,550 in 9ct gold — where the band is a piece in its own right rather than a companion. Each listed price is the finished band, diamonds included, and is shown live for every metal and size on its page.

Made to sit with your engagement ring

Most of the wedding bands we make are made to a specific engagement ring, and the ring does not have to be one of ours. Bring it in. We look at how it sits on your finger, how low the setting reaches, and whether a straight band will sit flush against it or leave a gap. Often a straight band in the right profile is all that is needed. Where the engagement ring is set low or has a wide head, we design a fitted band — gently curved or notched so the two rings sit together as one piece and do not wear against each other.

Matching the metal matters as much as the shape. Two whites that are not quite the same white will show, and so will two yellows of different depth. We match your band to the colour and carat of the existing ring so the pair reads as it should. If the engagement ring was made elsewhere and its metal is uncertain, we test it in the boutique first.

Choosing both bands together is worth doing. A pair does not need to match — a fine diamond band beside a broad brushed men's band is a common and handsome combination — but seeing them side by side on the day you choose means the metals, the finishes and the weights are decided with each other in mind rather than in isolation. Most couples settle it in a single visit.

Men's wedding bands

A men's band is usually wider, heavier and plainer, and all five plain profiles above are made in broader widths — 4mm, 5mm and 6mm are listed, and wider is made to order — in 9ct or 18ct gold or in platinum. A brushed or matte finish hides day-to-day marks better than a high polish; a rounded inside edge makes a wide band comfortable to wear all day. Two-tone bands, a line of diamonds, or a plain band with a single stone set flush are all made to order. Come in and try weights on the hand; the right band is the one you stop noticing.

The Simon Alexander certificate

Every wedding band leaves the boutique with a Simon Alexander certificate. It records the band as our work and describes it — the metal and its carat, and for diamond bands the number and total weight of the stones set in it — so that what you own is on paper, in our name, for insurance and for the future. It is the certificate that belongs on a band, and it is the one we stand behind.

Lead times and fittings

Allow four to six weeks from approval for a band to be made, set and hand-finished. For a plain profile in a standard size that can sometimes be quicker; for a fitted band shaped to an engagement ring it is worth allowing the full six. If the wedding is close, tell us the date at the first conversation and we will tell you honestly whether it can be met. For Christmas, order or approve your design by Tuesday 1 December 2026.

Sizing is done in the boutique with the engagement ring on your finger, because a band worn against another ring fits differently from one worn alone. Fingers change with the season and the time of day, so we size in the middle of that range. Your first resize is complimentary, along with an annual clean and check, so if the fit shifts in the years ahead, bring it back to King William Street.

Wedding rings in the Adelaide CBD

We are at Level 1, 14 King William Street, a few minutes' walk from Rundle Mall. Walk in Monday to Friday 9:30am to 5:30pm or Saturday 10am to 4pm, or book a private viewing if you would like the room to yourselves. Bring the engagement ring, and bring each other — choosing wedding bands is one of the few parts of the planning that is genuinely pleasant to do together. Our clients rate us 4.9 on Google across 30 reviews.

Simon Alexander has been designing rings in Adelaide since 2001, under diamantaire and designer Simon Dimasi, author of A Diamond Truth. We have been the official maker of the SANFL premiership rings since 2020: rings made for people who are hard on their hands, which is a fair test for a wedding band too.

Wedding rings in Adelaide: your questions

How much do wedding rings cost in Adelaide?

At Simon Alexander, plain wedding bands in a round, half-round, knife-edge, tapered or flat profile are priced by metal, width (2mm to 6mm) and finger size: from about $450 for a 2mm flat or tapered band in 9ct yellow gold at sizes A to J, and about $1,400 for a 2mm round band in 18ct yellow gold. Diamond bands are set with natural diamonds and priced by metal and finger size, from about $1,550 in 9ct gold. Every band's price is shown live on its page; wider or more elaborate bands are quoted individually.

How long does it take to make a wedding ring?

Allow four to six weeks from approval. A plain band in a standard size can sometimes be quicker; a fitted band shaped to an engagement ring needs the full time. We recommend coming in about three months before the wedding, which leaves room for a fitting and any adjustment without pressure.

Can you make a wedding band to match an engagement ring bought elsewhere?

Yes. Bring the ring in and we will match the metal colour and carat, choose a profile that sits flush, and if the setting is low or wide, design a fitted band that curves around it. We test uncertain metals in the boutique before we begin so the pair reads as one piece.

Should I choose a plain or a diamond wedding band?

Try both on beside your engagement ring. A plain band lets the engagement ring lead and is the easier of the two to live with day to day. A diamond band adds light along the finger and suits a larger or halo-set engagement ring. There is no wrong answer; the pair should simply look intended.

What width should a wedding band be?

Our plain bands are listed in widths from 2mm to 6mm. 2mm sits neatly beside most engagement rings; 2.5mm to 3mm reads a little more substantial on a woman's hand, and men's bands are usually 4mm to 6mm. Width changes how a band feels between the fingers, so try a few before deciding.

What certificate comes with a wedding band?

Every band comes with a Simon Alexander certificate, which records the band as our work, states the metal and its carat, and for diamond bands lists the number and total weight of the diamonds set in it. It is the document you need for insurance and it stays with the ring for life.

Do you make men's wedding bands?

Yes, to order. All five plain profiles are made in wider widths, in 9ct or 18ct gold or platinum, with polished, brushed or matte finishes. Two-tone bands, flush-set stones and a line of diamonds are all possible. Come in and try weights on your hand before you choose.

Can a wedding band be resized later?

Plain bands and most diamond bands can be resized, and your first resize is complimentary. Bands with diamonds all the way around are the exception, which is one reason we size carefully in the boutique with the engagement ring on. Bring your band back for a clean and check at any time.